cinelli wrote:Can a 6 x 6 x 6 cube be made with 27 bricks that are each 1x2x4 units? If so, how? If not, why not?
Spoiler...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
No, it cannot. To see why not, first split the cube into 27 2x2x2 subcubes in the obvious (and only) way, of two types A and B, with:
* The corner and face centre subcubes being of type A. There are therefore 8+6 = 14 subcubes of type A.
* The edge centre and body centre subcubes being of type B. There are therefore 12+1 = 13 subcubes of type B.
Or pictorially:
Top layer of subcubes
+-----+-----+-----+
| A | B | A |
+-----+-----+-----+
| B | A | B |
+-----+-----+-----+
| A | B | A |
+-----+-----+-----+
Middle layer of subcubes
+-----+-----+-----+
| B | A | B |
+-----+-----+-----+
| A | B | A |
+-----+-----+-----+
| B | A | B |
+-----+-----+-----+
Bottom layer of subcubes
+-----+-----+-----+
| A | B | A |
+-----+-----+-----+
| B | A | B |
+-----+-----+-----+
| A | B | A |
+-----+-----+-----+
Now colour the 8 1x1x1 cubelets making up each subcube of type A red and yellow as follows:
Top layer of cubelets
+-----+-----+
| R | Y |
+-----+-----+
| Y | R |
+-----+-----+
Bottom layer of cubelets
+-----+-----+
| Y | R |
+-----+-----+
| R | Y |
+-----+-----+
and the 8 1x1x1 cubelets making up each subcube of type A blue and green as follows:
Top layer of cubelets
+-----+-----+
| B | G |
+-----+-----+
| G | B |
+-----+-----+
Bottom layer of cubelets
+-----+-----+
| G | B |
+-----+-----+
| B | G |
+-----+-----+
The 216 cubelets making up the 6x6x6 cube are therefore coloured red, yellow, green and blue with 14*4 = 56 coloured each of red and yellow and 13*4 = 52 coloured each of green and blue.
However, it is easy to see that each layer of 6x6 cubelets making up the 6x6x6 cube, in each of the three directions (so 3*6 = 18 layers in total), is coloured:
+-----+-----+-----+-----+-----+-----+
| W | X | Y | Z | W | X |
+-----+-----+-----+-----+-----+-----+
| X | W | Z | Y | X | W |
+-----+-----+-----+-----+-----+-----+
| Y | Z | W | X | Y | Z |
+-----+-----+-----+-----+-----+-----+
| Z | Y | X | W | Z | Y |
+-----+-----+-----+-----+-----+-----+
| W | X | Y | Z | W | X |
+-----+-----+-----+-----+-----+-----+
| X | W | Z | Y | X | W |
+-----+-----+-----+-----+-----+-----+
for W, X, Y, Z some permutation of the four colours.
Now observe that however a 1x2x4 brick is placed, it is in one of those 18 layers, and however it is placed in such a layer, it contains 2 cubelets of each colour. So if I could construct the 6x6x6 cube from 27 such bricks, it would contain 27x2 = 54 cubelets of each colour - which it doesn't, so I cannot construct it that way.
Gengulphus